High Performance Digital Film with X-Scape

DPF 4600GLX/MLX is your go-to high performance calendered film providing
you with an efficient and versatile solution. DPF 4600GLX/MLX can be used with or without an overlaminate while maintaining the perfect balance of body and conformability. The repositionable light gray adhesive allows for easy installation while ensuring enough opacity for covering existing graphics. The LX (Low Profile) X-Scape Technology® provides installers a bubble-free installation with a smooth, paint-like finish for a multitude of different applications from vehicle decals, to promotional signage, and interior wall. Depend on DPF 4600GLX/MLX to deliver the best results

Arlon DPF 4600GLX/MLX Product Description

Printable on Eco-Solvent, Solvent, Latex and UV printers
Ideal for interior & exterior intermediate signage
Great for partial vehicle wraps with flat & simple curves and short term interior floor graphics^
Recommended overlaminates: Series 3220, Series 3210, Series 3170, Series 3410*or Series 3420

Property	Test Methods	Typical Value
Surface Finish	Gloss Meter 60° Reflection	80 to 90 Gloss Units 10 to 15 Gloss Units (Matte)
Thickness	Micrometer, Federal Bench Type	3.2-mil (80 micron)
Tensile Strength	Tensile Tester 2-in (51 mm) jaw seperation; crosshead speed of 12 in/min. (5.1 mm/s); web direction	≥ 14 lb/in	≥ 2.5 kg/cm
Elongation	Instron Tensile Tester as above	≥ 190%
Shelf Life (In Box)	Ideal Storage Temperature 70°F (21°C) and 50% relative humidity	1 year from factory shipment
Application Temperature Range	On clean, dry substrate	60°F to 80°F	15°C to 27°C
Service Temperature Range	On clean, dry substrate	-20°F to 150°F	-29°C to 65°C
Dimensional Stability	158°F (70°C), 48 hour	15-mil	0.38 mm
Peel Adhesion	PSTC-1, 15 min, 70°F (21°C)	≥ 3.9 lb/in	≥ 0.70 kg/cm
Liner Release	TLMI Release at 90°, 300 in/min (760 cm/min)	70 g/2 in	14 g/cm